Riveting l Riveting Tools l Avro Wolfpack EFX Extra Force

Riveting Tools l Avro Wolfpack EFX Extra Force    

The Avro “Wolfpack” series of riveting hammers feature a revolutionary piston design that delivers far more power and assists in absorbing vibration, allowing the operator to choose a smaller and lighter tool for the same application.
The “Ergonomic” housing is designed for maximum operator comfort and the “Ergo Grip” which acts as a thermal protector and helps isolate vibration, are both standards in these tools. A spool valve system delivers slow, heavy blows necessary to drive rivets. An extremely sensitive teasing throttle permits precise control.


Model
Capacity
Blows/minute
Bore & Stroke
Length
Weight
Alu/steel
in / mm
in / mm
lb / kg
WP200 EXF Rivet Hammer 2X .401 Shank
10225
3/16" / 1/8"
2580
9/16" x 2-1/4" / 14.3 x 57.2
6-11/16" / 170
2.7 /1.2
(4.76mm / 3.18mm)
WP300 EXF Rivet Hammer 3X .401 Shank
10335
1/4" / 3/16"
2160
9/16" x 2-1/4" / 14.3 x 57.2
7-5/16" / 186
2.9 / 1.3
(6.35mm / 4.76mm)
WP400 EXF Rivet Hammer 4X .401 Shank
10445
5/16" / 1/4"
1740
9/16" x 3-1/16" / 14.3 x 77.8
8-15/16" / 227
3.1 / 1.4
(7.9mm / 6.35mm)


Standard Equipment:

Special quick change retainer #92010
General:
Air Inlet 1/4” NPT Standard
1/4” BSP (Europe) ADD-E to part number; eg: 10445 E
Use 5/16” (8mm) I.D Hose
All tools rated at 90 psi (620 KPA) air pressure.
Safety Precaution: Read and follow all safety operating instructions.
WARNING: Excessive or improper use may result in carpal tunnel syndrome (”White Finger”) disease.
Face and eye protection must be worn while operating power Tools, per ANSI B186.1